PureCloud Edge Setup Administrator's Guide
1
3
Set up PureCloud Edge
Unpack PureCloud Edge ..................................................................................................................................................................................
13
Mount PureCloud Edge ...................................................................................................................................................................................
13
Connect the cables to PureCloud Edge ...........................................................................................................................................................
15
Start PureCloud Edge ......................................................................................................................................................................................
15
Configure the IP address of the PureCloud Edge WAN network interface ...................................................................................................
16
Set the global service region for PureCloud pairing .......................................................................................................................................
19
Pair PureCloud Edge with the PureCloud service .........................................................................................................................................
20
Unpack PureCloud Edge
Your PureCloud Edge package includes the following items:
•
One PureCloud Edge appliance
•
Two power cables
•
Two rack mounting brackets
•
Six mounting bracket screws
•
A product information sheet
•
Setup quick reference
Ensure that all of these parts are available before you proceed.
Mount PureCloud Edge
1
.
Decide on a suitable location for the rack unit that will hold PureCloud Edge. It should be situated in a
clean, dust-free area that is well-ventilated. Avoid areas where heat, electrical noise, and electromagnetic
fields are generated. You must also place it near a grounded power outlet.
You must remember the following needs of PureCloud Edge when choosing the location where it will
reside:
•
Leave approximately
30
inches of clearance in the back of the rack to allow for sufficient airflow and
ease of servicing.
•
You should only install this product in a Restricted Access Location, such as dedicated equipment
rooms or service closets.
2
.
Consider the following rack precautions:
•
Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full
weight of the rack resting on them.
•
In a single rack installation, ensure that stabilizers are attached to the rack.
•
In multiple rack installations, ensure that the racks are coupled together.
•
Always make sure that the rack is stable before extending a component from the rack. You should
never extend more than one component at a time as extending two or more components
simultaneously can cause the rack to become unstable.
3
.
Attach the provided mounting brackets to the PureCloud Edge chassis with the provided screws.
There are multiple methods with which you can install the mounting brackets:
