Inter-Tel Basic Digital Endpoint, User Manual

Page: 4 / 118

2
P
LACING
A C
ONFERENCE
C
ALL
1.
While on the first call, press . The call is now on hold.
2.
Place an intercom or outside call, then press the flashing button to
place the call on hold. (If necessary, repeat this step to place a third call on
hold.)
3.
Press the flashing button to join all of the calls together in the con-
ference.
NOTE:
Conference calls are limited to three parties on SIP endpoints.
F
ORWARDING
C
ALLS
1.
Press . (Six-line display model users must then select a menu button.)
2.
Do one of the following:
• To forward to an outside telephone number: Select an outside line
and dial a telephone number.
• To forward to an extension number: Dial the extension number.
• To forward to your voice mailbox: Dial the voice mail extension.
To cancel call forwarding:
1.
Press
.
2.
If you have a six-line display endpoint , press the
FWD OFF
menu button.
If you have a non-display or two-line display endpoint , press , , or
lift and replace the handset.
R
ESPONDING TO A
W
AITING
C
ALL
If you hear a “call waiting” tone through your handset or headset, either end
your current call or place it on hold. Then press ,
, , or the
flashing button.
C
HANGING
V
OLUME
L
EVELS
EITHER, Press the high ( ) or low (
)
end of the Volume button.
OR, Press the Up or Down arrow on the Volume button.
OR, Press the
VOL UP
or
VOL DN
button.
To save your change:
EITHER, Press both ends of the Volume button at the same time.
OR, Press the middle of the Volume button.
OR, Press both
VOL UP
and
VOL DN
buttons at the same time.
R
EDIALING A
N
UMBER
Select an outside line and press or dial . The number is auto-
matically dialed.
CNF
CNF
CNF
FWD
FWD
SPKR
SPKR ANSWER
REDIAL
3 8 0