![Inter-Tel Basic Digital Endpoint User Manual Download Page 31](http://html1.mh-extra.com/html/inter-tel/basic-digital-endpoint/basic-digital-endpoint_user-manual_2075853031.webp)
19
Inter-Tel
®
Standard/Basic Endpoint User Guide
GETT
ING ST
ART
E
D
To redirect a ringing call to another extension or to an outside number:
1.
Press
and dial
.
2.
Enter the extension or outside number to which you want to redirect the call. See
for more information.
If the Off-Hook Voice Announce feature is enabled for your endpoint, when you hear
a single tone and see an incoming call display, you can do one of the following:
•
To accept the call on the speakerphone without ending your current call:
When you hear a double tone, you may talk handsfree with the caller through the
speakerphone. (The caller on the handset will be able to hear both you and the
party on the speakerphone.)
•
To block the call from coming through the speaker:
— Press
to allow the incoming intercom call to camp on. The
button flashes, and the call is placed on hold.
— Press
to place your endpoint in DND mode, if desired. (See
for more information about DND mode.)
Outside Calls
With outside calls, you can talk to people who aren’t members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1.
With or without the handset lifted, press
.
2.
Dial the desired number.
NOTE:
If you see a request for an account code and hear a single beep, you must
dial an account code before you can place your call (see
).
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing
:
•
Dial the Outgoing Call feature code (default is 8).
•
Press an unlit
CALL
button if you have one.
•
Press an unlit
LINE
button, if you have one.
•
Dial a Select Line Group feature code (the defaults are 92001-92208 but may dif-
fer depending on the software version).
•
Dial the Automatic Route Selection (ARS) feature code (the default is 92000 but
may differ depending on the software version).
∞
3
3
1
SPKR
IC
DND
OUTGOING
OUTGOING
Summary of Contents for Basic Digital Endpoint
