13
SC-9216R
SPEAKER LINE CHECKER
5. 1 of 4 All Store
ALL STORE will store new reference values for all channels. One of the four system configurations (4-1, 4-2,
4-3, 4-4) must be selected though in most applications it does not matter which one is used. The selection
process is described in the Advanced Operation section of this manual. Selecting 4a is generally suitable.
6. 1 of 4 Single Store
SINGLE STORE will store new reference values only on the channel indicated on the display. Channel
selection is performed by depressing the Up and Down cursor buttons on the front of the SC-9216R, then
depressing ENTER. One of the four system configurations (5-1, 5-2, 5-3, 5-4) must be selected though in most
applications it does not matter which one is used. The selection process is described in the Advanced
Operation section of this manual. Selecting 5-1 is generally suitable.
7. 1 of 5 Fault Found
The FAULT FOUND display will indicate which channel has any one of five different types of faults, with a
recommendation to have the system serviced. The failure criteria are listed with the failure modes in the
specifications section and the failure criteria section of this manual.
[5-1]
[5-2]
Store new Ref.
On ALL CHANNELS
press ENTER.
(Spk W x 70V)
Store new Ref.
On ALL CHANNELS
press ENTER.
(Spk W x 100V)
[5-3]
[5-4]
Store new Ref.
On ALL CHANNELS
press ENTER.
(Spk Z, 70V)
Store new Ref.
On ALL CHANNELS
press ENTER.
(Spk Z, 100V)
[6-1]
[6-2]
Store new Ref.
On CHANNEL XX
press ENTER.
(Spk W x 70V)
Store new Ref.
On CHANNEL XX
press ENTER.
(Spk W x 100V)
[6-1]
[6-2]
Store new Ref.
On CHANNEL XX
press ENTER.
(Spk Z, 70V)
Store new Ref.
On CHANNEL XX
press ENTER.
(Spk Z, 100V)
[7-1]
[7-2]
Fault Found
Service Required
Ch. 9
Line Open
Fault Found
Service Required
Ch. 17
Line Imp. High