I N S T A L L A T I O N M A N U A L
W I L D R I D E ™ S L I D E
11
WRS-IM Rev. 7/08 (SBK-INST WRS)
Fig. 16
Fig. 17
Fig. 18
STEP FOURTEEN:
Attach Water Supply to Slide
Slip the provided 1” flex pipe through the hose hanger rings along the underside of the step.
You can use either the right or the left hand side. Then slip it through the underside of the
seat. (See Fig. 16)
Using PVC glue attach the flex pipe to the water supply fitting under the flume. (See Fig. 17)
Using PVC glue attach on/off ball valve near the deck above the water stub up. (See Fig. 18)
STEP FIFTEEN:
Attach Protective Caps
Ensure that all bolts are securely tightened.
Place a protective rubber cap over each exposed bolt and nut.
STEP SIXTEEN:
Give the Owner’s Manual to Homeowner
Give the homeowner the Owner’s manual and go over the intended use instructions with
them.
FINAL & ANNUAL INSPECTION CHECK LIST:
1. Inspect the runway for visible cracks or tears.
2. Inspect the edges of runway for sharpness, loose cracks or tears.
3. Inspect the slide for loose or corroded fasteners.
4. Inspect all step-attachment points for evidence of shear, bending, yield or fatigue. Yield
is evidenced by crystallization or fine cracking of the ladder tread or surface.
5. Inspect the ladder handrails for rigidity and attachment; can they be pulled out of their
sockets.
6. Inspect the slide for sharp edges or protrusions on the ladder, deck flanges, handrails
or runway.
7. Measure the depth of the water in front of the slide exit and measure height of exit and
compare to Diagrams A, B and C on page 3.
8. Check the position of the slide exit to Diagrams D, E, F and G on pages 4 and 5.
9. Make sure the slide warning label is securely adhered to the slide.
10. Personally Give the owner’s manual to the customer and go over the
INTENDED USE
INSTRUCTIONS
with them.
