1.800.737.5386 • www.Inter-Fab.com
7
g.
Attach the seat half and the seat belt to the mounting plate of the seat arm using:
2 - 5/16"-
18 x 1”
2 - 5/16"-
18 x ¾”
4 - 5/16" Flat Washers
4 - 5/16" Lock Washers
Note: When attaching the seat belt use 5/16"-18 x 1" as shown below.
h.
The below image shows the proper way to assemble the seat belt.
i.
Attach the other seat half to the back rest mounting plate using:
4 - 5/16"-
18 x ¾”
4 - 5/16" Flat Washers
4 - 5/16" Lock Washers
j.
Attach the footrest to the seat arm assembly using:
1 - 3/8"
– Hex Bolt 2”
1 - 3/8" Flat Washers
1 - 3/8" Nylock Nut
Tighten the bolt until the flat washers are snug, and then back off until the Footrest pivots freely. Adjust
footrest to desired height using installed 3/8" - Button Head Bolt.
k.
Test the lift for proper operation.
