background image

I N S T A L L A T I O N   M A N U A L

D U R O - S P R I N G ™

2

DS-IM  Rev. 12/09  (BK-DS INSTALL)

This Inter-Fab diving board and stand shall be installed only by a professional swimming pool contractor
or with the direct supervision of a licensed professional, engineer or architect.  Diving boards may
be installed only on residential inground swimming pools properly designed for their use.

Diving boards that are improperly installed can be very dangerous to the user resulting in possible
serious head and/or spinal column injury, including the paralysis or death of the user.

It is very important that this diving board and/or stand be installed only on a pool that is built in
strict accordance with the American National Standard for Residential Inground Swimming Pools
(ANSI/NSPI-5 2003) and in strict accordance with the included INTER-FAB RESIDENTIAL POOL
SPECIFICATIONS TABLE 2.  Under no circumstances can this diving board and/or stand be
installed on any above ground or on-ground swimming pool.

In addition to the above standard and referenced table, these installation instructions provided by
Inter-Fab, Inc. must be diligently followed.

It is also important that any and all warnings provided with the diving board be strictly adhered to
and posted in a conspicuous location.  If not provided or they are misplaced, please purchase
warning signs from your pool contractor or professional pool supply store and post them in a location
that the users of the diving board can clearly see.

SAFETY FIRST!

DIVING TIPS: Even the safest equipment must be used properly.  Inter-Fab promotes safe diving by
offering these tips on the proper use of your diving board: always dive into water that meets depth
requirements, with arms extended; be aware of the bottom and the walls of the pool; avoid collisions
with pool toys and floats; and instruct your pool users to always “steer up”.  When you begin your
dive you must get ready to steer up.  As you enter the water, your arms must be extended over
your head, hands flat aiming up.  Hold your head and arch your back.

FOR RESIDENTIAL INGROUND SWIMMING POOL USE ONLY

NO COMMERCIAL, PUBLIC OR SEMI-PUBLIC USE IS ALLOWED

ONLY ONE PERSON ON THE DIVING BOARD AT ONE TIME

MAXIMUM WEIGHT = 250 LBS

Plan Your Dive

Back Arched

Arms Extended

Head and Hands Up

Hold Diving Form

Steer up for a safe dive.

PLAN YOUR DIVE, STEER UP

Summary of Contents for DURO-SPRING




















Reviews: