Inter-fab DURO-SPRING, Assembly/Installation Instructions

Page: 11 / 19

I N S T A L L A T I O N M A N U A L D U R O - S P R I N G ™
9 DS-IM Rev. 12/09 (BK-DS INSTALL)
HARDWARE
TIGHTENING
SCHEDULE:
Secure Stand to Jig with Anchor
Hex Nuts at 40-45 FT-LBS
Secure Board to Stand with
Mounting Hex Nuts at 20-25
FT-LBS
TABLE 7 – PARTS LIST
FIG. D – DURO-SPRING STEEL BASE EXPLODED VIEW
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
DSS6 (shown)
DSS8
NOTES:
DSS6 diving board shown in exploded view for illustration purposes. Must be purchased separately.
ITEM # COMPONENT DESCRIPTION DS-M DS-BK N/A
KITS – QTY. COUNTS
1 DS6WW 6' Duro-Spring White w/ White Top Tread & Hdw Kit 1
2 DS-J Duro-Spring Mounting Jig 1
3 DSS6 6' Duro-Spring Jump Stand 1
4 H-1/2 BLK WASH 1/2 x 2" Black Rubber Washer 3
5 H-1/2 NYLON WAS 1/2" Flat Washer Nylon 3
6 H-1/2 RED WASH 1/2 x 2" Red Rubber Washer 3
7 H-SS 1/2 LOC WA 1/2 Lock Washer S.S. 3
8 H-SS 1/2 H NUT 1/2"- 13 Hex Finish Nut S.S. 3
9 H-SS 1/2 F WAS 1/2 USS Flat Washer S.S. 3
10 H-1-1/2 WHT CAP .750 x 1-1/2 White UV Nut Cap 3
11 H-SS 3 C BOLT 1/2-13 x 3" Carriage Bolt S.S. 3
12 H-WHT WAS/CAP I.F. White Washer/Cap 3
13 H-1x1-1/2 W CAP 1" I.D.x 1-1/2" Long White UV 3
14 H-5/8 RD WASH 5/8 x 1-3/4" Round Nylon Washer 3
15 H-SS 5/8 F WASH 5/8" USS Flat Washer S.S. 3
16 H-SS 5/8 LOC WAS 5/8 Split Lock Washer S.S. 3
17 H-SS 5/8 H NUT 5/8-11 Hex Finish Nut S.S. 3
HARDWARE NOTE:
Use a small dab of
anti seize lubricant
(included) on all bolt
threads.