EN
- Page 3 of 8
Device overview
USE
1. Function key (ON/OFF)
By briefly pressing, the current battery status is displayed through the LED lights and the Wireless
Charging Function of the Powerbank is activated. By fast, twice pressing, you can deactivate it
again.
If no device is connected to the Powerbank, or the connected device signals the Powerbank that
it is fully charged, the Powerbank changes automatically into standby mode after a time interval
of approx. 40 seconds.
Operation
LED light
% - Energy
LED 1
LED 2
LED 3
LED 4
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected Devices
a) Charging the Powerbank
Connect the supplied microUSB cable with the microUSB port (microUSB IN) of the Powerbank
and connect the other end of the USB cable with a standard USB port of a computer or USB
power pack. The charge process and the current charge status is signalled by the LED status
lights. If the Powerbank is fully charged, the LED status lights are lit permanently. The required
charging time of the Powerbank is dependent on the selected charging source and its output
power (max. 5V / 2A).
2
1 - Function key (ON/OFF)
2 - USB 1 Out
3 - microUSB In
4 - USB 2 Out
5 - Status LEDs
6 - Wireless Charging
Area
1
3
4
5
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
6