33
3. If still intermittent after
replacing lead wire, a
component may have failed.
Call the repair department.
Program option
in use
Some programs will seem
intermittent. This is expected.
Refer to the Program
Option Controls in the
Operation section for a
description of the program
option.
Stimulation is
ineffective
Improper electrode
and applicator
placement
Reposition electrode and
applicator
Unknown
Contact clinician.
The skin
becomes red
and/or you feel a
stabbing pain
Use the electrodes on
the same site every
time
Re-position the electrodes. If
at any time you feel pain or
discomfort stop use immediately.
The electrodes are
not sticking to the
skin properly.
Ensure the electrode is stuck
securly on the skin
The electrodes are
dirty
Clean the electrode pads with
a damp, lint free cloth or
replace new electrode pads.
Clean the electrode belt
according the description in
user manual.
The surface of the
electrode was
scratched.
Replace new electrode.
Output current
stopes during
therapy
The electrode pad
comes off the skin.
Turn off the device and stick the
electrode pad firmly to the skin
The cable is
disconnected.
Turn off the device and connect
the cable.
The power of the
batteries and been
exhausted
Please replace them with new
batteries.
