30
3) Inspect your electrodes before every use. Replace
as needed. Reusable electrodes may cause slight skin irritation,
lose adhesion and deliver less stimulation if overused.
Reusable, Self~adhering electrodes
To use these electrodes:
1) Attach the electrode to the lead wire.
2) Remove the protective backing from the electrode surface.
Do not throw away the protective backing because it is reused
after the treatment session has been completed.
3) Place the tacky surface to the prescribed skin area by
pressing the electrode firmly against the skin.
To remove your electrodes:
1) Lift the corner of the electrode and gently remove it from the skin.
2) It may be helpful to improve repeated application by
spreading a few drops of cold water over the adhesive and
turn the surface up to air dry. Over Saturation with water
will reduce the adhesive properties.
3) Between uses, store the electrodes in the resealable bag in a
cool dry place.
Adhesive Pad
Connector for
inserting Lead
wire Pin
