intensity IF COMBO DI4738, Instruction Manual

Page: 29 / 36

TENSPros
10. Electromagnetic Compatibility (EMC) Tables
Guidance and manufacturer’s declaration - electromagnetic emissions
The device is intended for use in the electromagnetic environment specified
below. The customer or the user assures that it is used in such an
environment.
Emissions
test
Compliance Electromagnetic environment - guidance
RF
emissions
CISPR 11
Group 1
The device uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF
emissions
CISPR11
Class B
The device is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonic
emissions
lEC 61000-
3-2
Not applicable
Voltage
fluctuations
/ flicker
emissions
lEC 61000-
3-3
Not applicable
Guidance and manufacturer’s declaration — electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The customer or the user should assure that it is used in such an
environment.
Immunity test
IEC 60601
test level Compliance
level Electromagnetic environment -
guidance
Electrostatic
discharge
(ESD)
lEC 61000-4-
2
±6 kV contact
±8 kV air ±6 kV contact
±8 kV air
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the relative
humidity should be at least
30 %.
29