intensity IF COMBO DI4738, Instruction Manual

Page: 19 / 36

TENSPros
Caution:
1) Before applying the self-adhesive electrodes, it is
recommended to wash and degrease the skin, and then dry it.
2) Do not turns on the device when the self-adhesive electrodes
are not positioned on the body.
3) Never remove the self-adhesive electrodes from the skin
while the device is still turns on.
4) It is recommended that, at minimum 1.5" x 1.5" self-adhering
based, square electrodes are used at the treatment area
4.4.3 Electrode placement
The placement of electrodes can be one of the most important
parameters in achieving success with therapy. Of utmost importance
is the willingness of the physician to try the various styles of
electrode placement to find which method best fits the needs of the
individual patient.
Every patient responds to electrical stimulation differently and their
needs may vary from the conventional settings suggested here. If the
initial results are not positive, speak to your physician about
alternative stimulation settings and/or electrode placements. Once
an acceptable placement has been achieved, mark down the
electrodes sites and the settings, so the patient can easily continue
treatment.
4.5 Turn on
Before using the device for the first time, you are strongly advised to
take careful note of the contraindications and safety measures
detailed at the beginning of this manual (Safety information), as this
powerful equipment is neither a toy nor a gadget !
In order to turn on the devi
The operation page appears on the screen.
4.6 Select the Therapeutic Mode
There are two therapeutic modes available –TENS and IF. The
therapeutic mode can be selected by pressing the [M] control.