intensity IF COMBO DI4738, Instruction Manual

Page: 22 / 36

TENSPros
4.8 Adjust Channel Intensity
Press the intensity control button ([ ▲ ] and [ ▼ ]) to control the
intensity output. Slowly press the intensity button control until you
reach the setting recommended by your physician or therapist.
Repeat for the other channel, if both channels are to be used.
Caution:
1) If the stimulation levels are uncomfortable or become
uncomfortable, reduce the stimulation intensity to a
comfortable level and contact your medical practitioner if
problems persist.
2) If the electrodes no placed firmly on skin or the device has
not connected on the electrodes, the stimulator’s output
intensity surpasses 12mA, the intensity will enulls
automatically reset to 0mA.
4.9. Safety Lock Feature
The Safety Lock Feature automatically activates after there is no
operation in the panel for 30 seconds by locking out the ability to
press the buttons. This is a safety feature to prevent accidental
changes to your settings and to prevent accidental increases to the
intensity levels. You can press either one of the [ ▼ ] buttons to
unlock the device.
4.10. Stop the treatment
When you have activated the treatment timer, you can press the [M]
button or the [ ▼ ] button to control stop the treatment.
Caution:
Default state; if the button is locked, you can press only one of
the [ ▼ ] buttons to unlock, and then press the [M]button or the
[ ▼ ] button to control stop the treatment.
22