Intellitec MT418L BT418, Instruction

Page: 9 / 24

EN
2,4GHz radio for Brushed version
Prepare the radio
Turn the radio and open
battery tray
Insert 8pcs AA batteries into
marked spaces. Please note di-
rection of the batteries. Incorrect
battery insertion could lead to
damage.
This 2,4GHz radio has a built in antenna that does
not need to be extended.
Functions on the radio
1. Power switch
2. Throttle trim
3. Steering trim
4. Power indicator
5. Battery tray
6. Steering reverse
7. Bind Key
8. Throttle reverse
9. Throttle trigger
10. Steering wheel
11. Charging jack
12. DSC for simulator
13. Power check
14. Steering Dual Rate
Throttle trigger
Neutral
1. Push the trigger forward
to reverse.
2. Pull the trigger back-
wards to go forwards
Dual rates
Dual rate settings allow
you to adjust the maximum
degree of movement on
the servo.
Steering Wheel
Turn the steering wheel
to the left or right to
make the model go in
that direction when to
model is moving away
from you.
Steering trim
Turn this to adjust so that the
model goes straight when the
steering wheel is in neutral
position.
Throttle trim
Adjust so that the model is still
in neutral position.
Note: If trim is adjusted
anti-clockwise the model can
begin to reverse!
Intellitec 1/18 models with brushed motor and 3-in-1 ESC/Servo/RX unit comes with this radio. The radio is easy to use
and setup and has several functions to adjust the model to your driving style.
This step is already done from the factory and does not need to be done before driving.
Should you ever need to bind transmitter and receiver, follow these steps:
A) Power on the receiver.
B) Press the button labeled ”BIND” on receiver.
Receiver LED starts to flash.
C) Press and hold ”BIND” on transmitter then turn on power.
D) When LED on receiver is ON the process is done.
Binding transmitter and receiver
LED
BIND button
Power Switch