IntelliSAW IRM-48 Reader
Installation Manual
Page 27 of 28
IRM-48 Reader
910.00371.0001
8.2.3.1 Installation Requirements
The IntelliSAW IRM-48 and approved antennas can be professionally installed in the following
installation environments:
1. Metal enclosures described in the IEEE/ANSI Std C37.20, or UL and NEMA
specifications derived from Std C37.20, as indicated in KDB 550099.
a. The Reader is not required to be in such an enclosure since the antenna is wired
away from the host.
b. The Reader firmware shall be configured for ANSI
2. Open air operation
a. The antenna and reader can operate outside of the metal enclosures when the
Reader firmware is configured for Open Air operation.
Changes or modification to the equipment not expressly approved by IntelliSAW could
void the user's authority to operate the equipment.
8.2.4
Industry Canada (IC)
This product contains device certified under
IC: 11526A-ISAWRFH0215
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modification to the equipment not expressly approved by IntelliSAW could void the
user's authority to operate the equipment
Ce produit contient un appareil certifié en vertu IC: 11526A - ISAWRFH0215
Cet appareil se mets en conformité avec les normes CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux conditions suivantes:
•
L’appareil ne produit pas de brouillage malfaisant.
•
L’appareil doit accepter tout brouillage radioélectrique reçu, y compris le brouillage qui
pourrait provoquer le fonctionnement non désiré.
Les changements ou les modifications apportés à l'équipement qui n'est pas expressément
approuvé par IntelliSAW pourraient annuler l'autorité de l'utilisateur à utiliser cet équipement.
