- 9 -
CONFIGURING THE DEVICE
ACCESSING THE WEB CONFIGURATION INTERFACE
The Intellinet Access Point is equipped with an array of features, which can be configured to your needs. Configuration
is done by means of a standard Web browser. Connect to the device either using a network cable, or by connecting to
one of the SSIDs ‘intellinet‐ac50’ or ‘intellinet‐n24’.
Open http://ap:setup or http://192.168.2.1 in your Web browser, and then type in admin as the user name and 1234
as the password. Click
Log In
to connect.
Default IP address: 192.138.2.1 ***
Default IP subnet mask: 255.255.255.0
User name: admin
Password: 1234
Note: When you log in for the first time, you will see the message above. Click ‘OK’ to change the administrator password.
Should you encounter problems connecting to the Web interface of the access point, one of the following issues may
be occurring.
Your computer’s IP address is not compatible with the IP address of the Intellinet Access Point. It must be in
the range of 192.168.2.2 to 192.168.2.254. Refer to Appendix A for information on how to set up the IP
address of the network adapter.
The Intellinet Access Point isn’t properly connected to either the LAN port of your computer or the network.
Verify that the LAN status LED is lit.
The IP address of your Intellinet Access Point may have been changed. To be certain, a hardware reset should
be performed. To do that, simply press the reset button for 10 seconds while the device is powered up.
*** Note: The device default IP address is 192.168.2.1, unless you connect the LAN port to your network where a
router or DHCP server is present. If connected to your network, the access point will receive an IP address from your
router. In that case you can access it via http://ap.setup.
