34
S
oft
AP
Country Region Code
— Select the country code of the country or region you’re in.
Options are 0-7, which will affect the available wireless channels you can use:
0: FCC (U.S., Canada and other countries using FCC radio communication
standards)
1: ETSI (Europe)
2: Spain
3: France
4: MKK
5: MKKI (TELEC)
6: Israel (channels 3 to 9)
7: Israel (channels 5 to 13)
No forwarding among wireless clients
— When selected, wireless clients won’t be
able to share data with each other.
Hide SSID
— When selected, the SSID will not be broadcast to the public. Your
wireless clients must know the exact SSID to be able to connect to your
computer. This option is useful to enhance the level of security.
Allow BW 40 MHz
— Select to allow BW 40 MHz capability.
Tx Burst
— Select to accelerate the data transmit rate.
NOTE:
It may not work with
all wireless access points and wireless devices.
Beacon (ms)
— You can define the time interval that a beacon signal should be
sent. The default value is 100.
NOTE:
Do not modify this value unless you know
what will be affected.
Tx Power
— Select a proper output power setting according to your actual needs.
For example, you may not need 100% of output power if other wireless clients
are not far from you.
Idle Time
— Select the idle time for the wireless access point.The default value is
300.
NOTE:
Do not modify this value unless you know what will be affected.
To save changes, click “Apply.” Click “Default” to reset all values to factory defaults.
4.2 Security Settings
This Wireless 300N PCI Card supports wireless encryption in AP mode, which will
encrypt the data being transferred over the air to enhance the data security level.
It’s recommended that you enable data encryption unless you want to open your
computer (and its Internet connection) to the public. Click “Security Setting” on the
Config screen to display the options below.
Authentication Type
— Select from among the available options: “Open,” “Shared,”
“WPA-PSK,” “WPA2-PSK” and “WPA-PSK / WPA2-PSK.” To disable wireless
data encryption, select “Open.”
Encryption Type
— Select from among the available options, which will vary
