background image

 

Introduction To Wireless Router 

 

General Description 

 

The Wireless Router built-in with 4-port 10/100Mbps Fast Ethernet Switch 

is the latest generation of Wireless router product for Home/Office and SOHO 
users who are thirsting high speed Internet access. This full-feature and 
self-contained compact Wireless Router will be fully for broadband access in 
both of LAN and Wireless environment. This device has been specifically 
designed to provide LAN and Wireless users the most cost-effective method with 
multiple accesses to the Internet at the cost of a single public IP address

IP 

Sharing

and enjoy the true Plug-and-Play installation. Moreover, the built-in 

4-port 10/100Mbps switch lets users plug the network cable into the device 
without buying additional switch.   

This device is also an Access Point. It has a built-in wireless LAN. Users 

can connect to Internet using wireless network interfaces anywhere within the 
range of its radio transmission. It’s idea for SOHO users who require instant and 
convenient access to Internet without the restriction of connecting cables. 

The friendly WEB-based graphics interface for setup makes any 

inexperienced users soon enter plug-and–play operation. Embedded DHCP 
server simplified IP address management and no MIS people needed for daily 
technical services. What is more, NAT/firewall is also implemented on this 
compact Router Box for protecting whole LAN from outside attack. 

 

Key Features 

 

The switch provides the following key features: 

Complies with 10BASE-T specifications of IEEE802.3 standard 

Complies with 100BASE-TX specifications of IEEE802.3u standard 

Complies with IEEE802.3x full duplex operation and flow control 

4 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity on LAN side 

1 * WAN port on WAN side 

Friendly GUI offers painless setup and management 

LAN/WAN management via WEB-Based management interface 

Supports DHCP client/server function 

Supports N-Way Auto-Negotiation on each LAN and WAN port 

Supports PPPoE protocol 

Supports NAT/NAPT function 

Supports Port, IP and MAC filtering, Port Forwarding and 

Virtual DMZ

 (Firewall); 

WEP and WPA (Wireless) 

Supports extensive LED indicators for network diagnostics 

External power adapter   

FCC CLASS B, CE 

Built-in 11Mbps IEEE802.11b wireless LAN Access Point 

An instant LAN with an integrated 4 ports 10/100Mbps switch

 

Summary of Contents for 523233





















Reviews: