Manageable Gigabit Switch
20 User’s Manual
Menu-Driven Console Management
The switch provides a menu-driven console interface for
configuration purposes. The switch can be configured either locally
through its RS-232 port or remotely via a Telnet session. For the
later, you must specify an IP address for the switch first.
This chapter describes how to configure the switch using its menu-
driven console.
Logging on to the switch
At the screen prompt
Login:
Password:
LOGIN NAME
Enter the console interface factory default console name
admin
.
PASSWORD
Enter the factory default password (no password,
press <Enter> directly
).
Or enter a user-defined password if you followed the instructions later and
changed the factory default password.
Factory Default Password:
no password, press
<Enter>
directly.
<Note>
Only one console and three telnet users can log on to the switch
concurrently. However, it is not recommended that multiple users
modify the configuration at the same time.
* For initial IP settings, you must configure the switch through its
RS232 port.