Manageable Gigabit Switch
User’s Manual 15
Cabling
Step 1:
First, ensure the power of the switch and end devices is turned off.
<Note>
Always ensure that the power is off before any installation.
Step 2:
Prepare cable with corresponding connectors for each type of port
in use.
<Note>
To connect two regular RJ-45 ports between switches or hubs, you
need a cross-over cable.
Step 3:
Consult Cable Specifications Table on previous page for cabling
requirements based on connectors and speed.
Step 4:
Connect one end of the cable to the switch and the other end to a
desired device.
Step 5:
Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.