Page 3
Intellimeter Canada Inc.
1125 Squires Beach Road, Pickering, ON, L1W 3T9 • Tel: (905) 839-9199
Copyright 2020 © MF Series Manual
WARNING
Field electrical installers must follow proper safety precautions and all local electrical code requirements
during electrical installation, meter wiring, and CT installation. During normal operation of this device,
hazardous voltages are present which can cause severe injury or death. It is strongly recommended that
only qualified, properly trained personnel should perform installation and servicing.
DISCLAIMER
The information presented in this publication has been carefully checked; however, Intellimeter Canada
Inc. (ICI) assumes no responsibility for inaccuracies. The information provided in this document is subject
to change without notice.
CUSTOMER SUPPORT
To report any defect, please contact ICI at 905.839.9199. Prior to returning any merchandise to ICI, a
return material authorization (RMA) number should be obtained from ICI.
STATEMENT OF CALIBRATION
The accuracy and calibration of our instruments are traceable to Measurement Canada, a division of
Industry Canada.
CONFIGURATION
The i-meter
®
MF series are only to be configured by Intellimeter Canada Inc. at ICI’s Factory according to
the customers provided panel schedule.
INSTALLATION CHECKLIST
Make sure you have received the right meter as per your order and packing list.
INSTALLATION DISCLAIMER
INTELLIMETER does not accept any responsibility and will not be liable for any loss or damage or
expense of any kind whatsoever and howsoever caused by improper installation of its products, be it
indirect, special, incidental or consequential damages (including but not limited to damages for loss of
business, loss of profits, interruption or the like). Please refer to Intellimeter's Terms and Conditions of
Sale available at
https://intellimeter.ca/pages/terms-of-service-privacy-statement
ELECTRICAL CODE
Installer is responsible for ensuring that all safety and local electrical codes are followed.