Intellihot iN199, Installation & Operation Manual

Page: 41 / 78

37 iN199 Operation
November 2021 - Revision 00
12.3 Setting the Time
Press the UP/DOWN arrows to make adjustments. Press
the BACK button to return to the main screen.
12.4 Adjusting the Water Temperature
Note: The outlet water temperature is factory preset to
120°F, however these commercial water heaters can
heat water to 190°F.
DANGER
Hot water temperature over 125°F (52°C)
can cause severe burns instantly or death
from scalding. Children, the disabled, and
the elderly are at the highest risk of being
scalded. Do not leave children or the
infirm unsupervised. Check temperature
of hot water before taking a shower or
bath. To control water temperature to a particular
faucet, temperature limiting valves can be installed by
your service professional.
All water faucets must be closed before changing the
temperature setting. The unit must not be operating.
1. Firmly press the (+) and (-) to increase or decrease
temperature. Firmly hold the icon until the display
reaches the desired temperature.