Installing Engage® Zone Control System
Engage® Zone Control Installation Manual
600840-000043, rev 1.4
Page 19 of 31
2.4. Installing the Work Switch
The work switch signals to Engage® Zone Control when the implement is in or out of the
ground.
Types of work switches
Intelligent Ag provides two different types of work switches: a whisker switch and a proximity
switch.
•
If you have a
hoe drill
, install the
whisker switch
.
•
If you have a
disc machine
, install the
proximity switch
.
Whisker switch
(356070-000041)
Proximity switch
(153560-000014)
Figure 15: Work switch types
Installation location:
Near an existing work switch or near the height sensor.
2.4.1. Installing the whisker switch (hoe drills)
NOTE:
Skip this step and follow the instructions in the next section if you have a disc machine.
Part name
Part number
Quantity
needed
Contained
within
Work switch extension
harness
353050-000011
1
System kit
Whisker switch
356070-000041
1
System kit
