52
Operating Install Wizard
(Option 2: Using Other Modems)
No.
Item
Description
1
iDirect Modem
TX Control
Adjusts the modem frequency to receive optimal signal. Click the "Apply" button
to apply the settings to the system.
• RF Uplink Frequency (MHz): enters the RF uplink frequency received from the
satellite operator through communication.
• BUC LO Frequency (MHz): the BUC LO frequency is applied automatically. The
value is fixed according to the satellite band.
• TX Frequency: the TX frequency is applied automatically. The value is "RF
Uplink Frequency" value - "BUC LO Frequency".
• Attenuator (dB): the attenuator is applied automatically.
2
Antenna Angle
Adjusts the antenna angle to receive optimal signal.
• Relative Azimuth: adjusts the relative azimuth angle.
• Absolute Azimuth: adjusts the absolute azimuth angle.
• Elevation: adjusts the elevation angle.
• LNB Pol Angle: adjusts the LNB Pol angle.
3
Test Result List
Enters the test result value received from the satellite operator.
• CPI Value(dB): enters the CPI value.
• P1 dB Compression: enters the P1 dB compression.
Refer to the following table for a detailed explanation of each menu.
Description
1. Enter the "
RF Uplink Frequency
"
received from the satellite operator
through communication and click
the "
Apply
" button.
2. Adjust the "
Antenna Angle
".
3. Enter the "
Test Result
" value
received from the satellite operator.
If you have no problems, click the
"Next" button.
1
2
3
