51
Operating Install Wizard
No.
Item
Description
2
iDirect Modem
TX Control
Adjusts the modem frequency to receive optimal signal. This menu can be edited
when the antenna is connected to iDirect Open AMIP modem and the CW is off.
Click the "Apply" button to apply the settings to the system.
• RF Uplink Frequency (MHz): enters the RF uplink frequency received from the
satellite operator through communication.
• BUC LO Frequency (MHz): the BUC LO frequency is applied automatically. The
value is fixed according to the satellite band.
• Current IF Frequency (MHz): the current IF frequency is applied automatically.
The value is "RF Uplink Frequency" value - "BUC LO Frequency".
The following menus are performed to adjust the transmit power of the frequency.
• Adjust Transmit Power: adjusts the power calibration value using the arrow
keys which increases or decreases by 0.5dBm.
• CW: selects whether or not to use the modulation function (On or Off). The
indicator right of the title shows the CW status. (Blue: a CW is on. Black: a
CW is off.) To edit the details of the iDirect Modem TX Control menu, you must
keep this function is off.
3
Antenna Angle
Adjusts the antenna angle to receive optimal signal.
• Relative Azimuth: displays the relative azimuth angle.
• Absolute Azimuth: adjusts the absolute azimuth angle using the arrow keys.
• Elevation: adjusts the elevation angle using the arrow keys.
• LNB Pol Angle: adjusts the LNB Pol angle using the arrow keys.
4
LNB Pol Sensor
Displays the Mechanical Offset value of the LNB Pol Sensor. The indicator right of
the title shows the LNB Pol Sensor status. (Blue: the LNB pol sensor is on. Black:
the LNB pol sensor is off.)
• Mechanical Offset: displays the mechanical offset value of the LNB Pol Sensor.
5
Test Result List
Enters the test result value received from the satellite operator.
• CPI Value(dB): enters the CPI value.
• P1 dB Compression: enters the P1 dB compression.
