manualshive.com logo in svg

Intellian v100Ka, Installation And Operation Manual

Share
Download
Intellian v100Ka Installation And Operation Manual Download Page 18

v100Ka – Marine Satellite Communication System

18

ACU (Antenna Control Unit)

The digital VFD (Vacuum Fluorescent Display) allows for easy operation of the ACU, 
even in the dark.

The functions of the ACU are as follows :
• Setting the satellite
• Editing satellite information
• Setting the antenna parameter
• Setting the antenna manual search
• Setting the LNB local frequency
• Setting block zones
• Setting modem connections
• Setting GPS and Gyrocompass
• Display power status
• Built-in real-time diagnostics function
• Backup and restore the system settings
• Set up the interface with a PC
• Supports Wi-Fi ACU operation
• Recording antenna activities and firmware upgrade through USB
• Built-in web-based remote control management
• Front and rear panel Management Ethernet port 

Antenna control unit

Rear panel

Front panel

Summary of Contents for v100Ka




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands