Intellian GX100PM, Installation And Operation Manual

Page: 51 / 139

51
OPERATING THE ACU
S E A R C H 1 0 6 2 . 6 E I 5 _ F 1 S I G : 1 0 2
A Z : 2 5 4 . 3 ( 1 6 4 . 3 ) E L : 1 0 . 9
1. The antenna is searching for the target satellite.
T R A C K I N G 0 6 2 . 6 E I 5 _ F 1 S I G : 2 0 1
A Z : 2 5 4 . 3 ( 1 6 4 . 3 ) E L : 1 0 . 9 F n
2. The antenna has locked onto the target satellite.
Current IF signal level SIG/ AGC is displayed. SIG will be displayed when NBD (Narrow band
detection) mode for TRACKING SIGNAL is chosen to be used and AGC will be displayed
when DVB mode of TRACKING SIGNAL is chosen to be used.
The symbol “•” will be only displayed when the satellite signal is strong enough to locked
onto.
True azimuth [ 254.3] position of the antenna is the sum of ships heading 090.0
[ HDG ] and antenna relative [ 164.3].
S A V E C U R R E N T S A T I N F O ?
Y E S N O
3. Touch FUNCTION key to save current satellite information or abort and return to the main
display. "Fn" will be displayed only if the antenna is in tracking mode.
NOTE: However, if the "GYRO TYPE" is set to "NONE" or "NMEA" but without
receiving a proper input signal, "---.-" will be displayed at "True Azimuth"
Monitoring Current Antenna Status
When the BDT power is on, it displays the status of the antenna. The current status
of the antenna is displayed as shown below.
Current search status
Current tracking status
Save current satellite info