Intellian GX100PM, Installation And Operation Manual

Page: 36 / 139

GX100PM – Marine Satellite Communication System
36
Mounting the BDT
Intellian supplies two types of mounting methods (a) 19” Rack Mount Type and (b)
Table Mount Type to mount the BDT.
19” Rack Mount Type
- The BDT should be installed using the two supplied Rack Mounting Brackets
which allow for a side 19” rack mounting configuration.
- Using the self tapping screws supplied, attach the mounting brackets to the sides
of the BDT.
- Place the BDT in the location where it is going to be installed.
- Connect the cables to the rear of the BDT.
Table Mount Type
- The BDT should be installed using the two supplied Table Mounting Brackets
which allow for a top or bottom mounting configuration.
- Using the self tapping screws supplied, attach the mounting brackets to the sides
of the BDT.
- Place the BDT in the location where it is going to be installed.
- Using a pencil to mark the 4 hole positions (2 each side), and use the appropriate
drill bit to screw down the brackets.
- Connect the cables to the rear of the BDT.
WARNING:
Ensure that the cables connected to the BDT are long enough to prevent
damage when the BDT is pulled out from the rack.
19" Rack mount type
Table mount type