Intelix
DIGI-HD-4X8
Installation Manual
12
www.intelix.com
IR Commands for 3
rd
Party Control Systems
Some 3
rd
party control systems will accept text data as well as utilizing
command learning. Go to
http://www.intelix.com/tech_library/software.htm
for
an electronic document of these commands.
RS232 Remote Control
The DIGI-HD-4X8 supports remote control through a rear panel RS232 control
port.
1.
If controlling the DIGI-HD-4X8 through the RS232 control port on the rear
panel, connect a straight-through serial cable directly to the matrix.
DIGI-HD-4X8 RS232 Settings
Settings
Bits per second
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
Hardware
IR Emitter Mounting Tips
Surrounding electrical equipment may be producing high levels of IR noise.
Plasma TVs and compact fluorescent lights are known polluters. Shield the
outside of the emitter and the hardware’s IR window with electrical tape.
Verify the emitter is directly on the hardware’s IR window and directly over
the IR sensor. Operation may be intermittent if the emitter is too far away
from the sensor.
Clean the DIGI-HD-4X8 IR sensor window with an alcohol-based cleaner
before applying the emitter to guarantee adhesion.
