Cedar 880AG Enterprise Dual-Radio AP/Bridge
Example:
Cedar#
↓
11.1.10 debug
Syntax:
debug { <module name> |
<module name> <level 1-5>
}
Description:
This command is used for enabling debug messages. The global debug switch must
be on in order to see the debug messages. The different debug level can be used to
control the amount of debug messages in the specified module.
Example:
Cedar#
debug //enable global switch for debug messages
Cedar#
debug auth 3
11.1.11 undebug
Syntax:
undebug { <module name> }
Description:
This command is used for disabling debug message. The global debug switch or
specific module debug switch can be turned off by using this command.
Example
:
Cedar#
undebug
Cedar#
undebug auth
11.1.12 help
Syntax:
help or ?
Descriptio
n:
74