Cedar 880AG Enterprise Dual-Radio AP/Bridge
•
802.11g Wireless LED
This LED is slow flashing when 802.11g wireless is ready for client to associate;
fast flashing when there is traffic on 802.11g wireless.
2.2.2 Rear Panel
•
DC Power Jack
The DC power jack provides the connection to the external 5V DC 2A power supply.
•
Reset Button
The Cedar 880AG rear panel contains one reset button which will reset the unit to the
manufacturer’s default configuration. Press and hold the button down for at least 5
seconds and the unit will automatically reboot and reset to the manufacturer’s default
configuration.
•
RJ45 Connector
The RJ45 connector provides the connection switch or gateway through a CAT 5
cable. This connector also provides the connection to PoE power source.
•
DB9 Connector
This DB9 connector provides the connection to the PC serial port for local
management. A straight RS232 cable is needed (not included in the package).
•
Antenna Connectors
Two reverse polarity TNC jack connectors are provided for connecting to antennas.
The antennas must have a reverse polarity TNC plug connector to be used with Cedar
880AG.
2.2.3 LED Description
LED Color
Indication
Green, solid
The unit power is on.
Off
The unit power is off.
Blue, solid
The Ethernet port has successful link.
Flashing
The Ethernet port is linked and has activity
Orange, slow
flashing
The 802.11a wireless is ready for client to associate.
Fast flashing
There is activity on 802.11a wireless
Off
The 802.11a wireless is not ready.
Orange, slow
flashing
The 802.11g wireless is ready for client to associate.
Fast flashing
There is activity on 802.11g wireless
Off
The 802.11g wireless is not ready.
13