Cables and Connectors
Intel
®
Carrier Grade Server TIGPT1U TPS
Revision
1.0
28
3.4.5 Ethernet
Connector
The server board SE7210TP1-E supports two NIC RJ45 connectors for the Ethernet ports. The
following table details the pin-out of each of the connectors.
Table 3-7. Magjack Connector (RJ45, 10/100/1000) Pin Out (J5A1, J6A2)
Pin Signal
Name Pin Signal
Name
1 LAN_V_1P8
10 LAN_MDI_0*
2 LAN_MDI_2*
11 LAN_MDI_0
3 LAN_MDI_2
12 LAN_V_1P8
4 LAN_MDI_1
13 LAN_LINK_100*
5 LAN_MDI_1*
14 LAN_LINK
6 LAN_V_1P8
15 LAN_LINK_UP*
7 LAN_V_1P8
16 LAN_ACTLED*
8 LAN_MDI_3
17 GND
9 LAN_MDI_3*
18 GND
3.4.6
Telco Alarms Connector
The system provides one telco DB15 alarms connector on the rear bulkhead. Table 3-8 shows
the pinout for the telco alarms connector, and Figure 3-2 shows the telco alarms connector as
viewed from the back of the server.
Table 3-8. Telco Alarms Connector
Pin Description Pin
Description
1
Mino
9
MinorAlarm – NC
2
MinorReset -
10
MinorAlarm - COM
3
Majo
11
MajorAlarm - NO
4
MajorReset -
12
MajorAlarm - NC
5
CriticalAlarm - NO
13
MajorAlarm - COM
6
CriticalAlarm - NC
14
PwrAlarm - NO
7
CriticalAlarm - COM
15
PwrAlarm - COM
8
MinorAlarm - NO
1
8
9
15
Figure 3-2. Telco Alarms Connector
3.4.7
AC Power Input for AC-Input Power Supply
One IEC320-C13 receptacle is provided at the rear of the AC-input power supply. It is
recommended to use an appropriately sized power cord and AC main. Please refer to
Section
9
,
AC Power Subsystem
,
in this document for system voltage, frequency, and current draw
specifications.