background image

Intel

®

 Server System SR870BH2  

 

Quick Start Guide 

Regulatory Specifications and Disclaimers 

 

FCC Electromagnetic Compatibility Notice (USA) 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operating in a commercial environment.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference.  In this 
case, the user is required to correct the interference at his/her own expense.  If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on; the user is encouraged to try to correct the interference by one or more of the 
following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and the receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

Any changes or modifications not expressly approved by the grantee of this device could void the 
user’s authority to operate the equipment.  The customer is responsible for ensuring compliance of 
the modified product. 

FCC Declaration of Conformity 

Product Type:  SR870BH2 

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two 
conditions:  (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 

For questions related to the EMC performance of this product, contact: 

Intel Corporation 
2800 Center Drive 
DuPont, WA  98327  USA 

Laser Compliance Notice 

Intel products that use laser technology comply with Class 1 laser requirements. 

 

Class 1 Laser Product 

Luokan 1 Laserlaite 

Klasse 1 Laser Apparat 

Summary of Contents for SR870BH2 - Server Platform - 0 MB RAM

















Reviews: