background image

12 

Intel

®

 Server System SR870BH2  

 

Quick Start Guide 

Item 

Feature 

Description 

SDINT (System Diagnostic 
Interrupt) switch 

Asserts SDINT.  

System ID switch and LED (Blue) 

System identification switch and light 

Indicates system status. 

LED State 

Description 

Off 

Not ready 

Post err/NMI Ev/CPU missing 

Green, 
On 

Ready No 

Alarms 

Green, 
Blinking 

Ready – Degraded 

CPU Fault, DIMM killed 

Amber, 
On 

Critical Alarm 

Critical of Pwr Flt, Fan, Voltage, 
and Temperature failures. 

System Status/Fault LED 
(Green/Amber) 

Amber, 
Blinking 

Non-Critical Alarm 

Non-Critical of redundant Pwr 
Flt, redundant Fan, Voltage, 
and Temperature failures. 

Indicates Hard drive subsystem fault status. 

LED State 

Description 

Off 

Drive Missing 

Slot Empty, Online, Prepare for 
removal. 

On Inactive 

Drive 

Failed 

Hard Drive Fault LED (Amber) 

Blinking 

 

Drive Identity, Rebuild, 
Predictive Fail, Rebuild 
Interrupt or Rebuild on empty 
slot. 

Indicates LAN activity status. 

LED State 

Description 

Off 

Inactive 

No Connection or Link 

On 

Idle 

Link and No Activity  

G, H 

LAN1, LAN2 Status LEDs (Green) 

Blinking 

Active 

Access / Activity 

Front Panel Connectors

 

Video connector 

Video port, standard VGA compatible, 15-pin connector 

USB3 connector 

USB port 3, 4-pin connector 

USB4 connector 

USB port 4, 4-pin connector 

 

Summary of Contents for SR870BH2 - Server Platform - 0 MB RAM

















Reviews: