Intel® Server Chassis SR1475 / Intel® Server System SR1475NH1-E
Revision 1.0
- 29 -
OM11684
C
E
A
B
D
Figure 20. Hard Drive Tray Assembly
A. Hard Drive
B. Drive Carrier
C. Side Rail
D. Mounting Screw
E. Hard Drive Connector
3.2.2
Fixed Drive Trays
In a fixed drive configuration, each SATA/SCSI hard drive must be mounted to a non-hot-swap
drive tray. The tray is designed to slide into the drive bay and lock into place. To remove the
drive, the chassis top cover must be removed to disengage the drive tray latch from the bay.
3.2.3 Drive
Blanks
Drive blanks must be used when no drive is used in a hard drive bay. Drive blanks simulate the
spatial volume of a hard disk which is required to maintain proper air pressure limits necessary
to cool the system.
Figure 21. Drive Tray with Drive Blank
Summary of Contents for SR1475
Page 87: ......
