manualshive.com logo in svg

Intel SE7520BD2, Technical Product Specification, Page: 160 / 179

Share
Download
Intel SE7520BD2 Technical Product Specification Download Page 160

Environmental Specifications 

Intel® Server Board SE7520BD2 Technical Product Specification 

148 

Intel Confidential 

Revision 1.3 

 

 

7.2.2 Voltages 

Supported 

The EPS12V 550-W power supply generates the following voltages: +5v, +3.3v, +12v, -12v and 
+5v Standby. High-frequency processor support will need a ~650W power supply, which is not 
yet defined. Other voltages required by the design are derived from linear and switching 
regulators. Refer to the modified power supply specification for additional information.  

Table 96.  Intel® Server Board SE7520BD2 Board Voltage Table 

Voltage 

Net Name 

Source 

Tolerance 

+12V 

P12V 

Power Supply 

+5% / -4% 

+3.3V 

P3V3 

Power Supply 

+5% / -3% 

-12V 

N12V 

Power Supply 

+9% / -5% 

+5V 

P5V 

Power Supply 

+5% / -4% 

+5V Standby 

P5V_STBY 

Power Supply 

+5% / -3% 

+12V 

P12V_CPU_0 

Power Supply 

+5% / -4% 

+12V 

P12V_CPU_1 

Power Supply 

+5% / -4% 

+0V GND Power 

Supply 

N/A 

+3.3V Standby 

P3V3_STBY 

Linear Regulator from +5V Standby 

+/-2.5% 

+3.3V Auxiliary 

P3V3_AUX 

Switches between 3.3V main and standby power rail 
depending on normal operation and sleep states 
respectively 

+/-3% 

+1.2V 

P_VTT 

Linear Regulator from +1.8V 

+/-3% 

+1.5V 

P1V5 

Switching Regulator from +5V 

+/-3% 

+1.8V 

P1V8_SCSI 

Linear Regulator from +3.3V 

+/-3% 

+2.5V  

P2V5_VIDEO 

Linear Regulator from +5V 

+/-3% 

+2.5V PV_SCSIA, 

PV_SCSIB 

Linear Regulator from +5V 

+/-1% 

+1.8V  

P1V8 

Switching Regulator from +12V 

+/-3% (without 
power switches) 

+1.8V DDR 

P1V8_CHA, 

P1V8_CHB 

MCH_VCCDDR 

Switched rail from P1V8 

+3/-3% (without 
power switches) 

+1.8V Auxiliary 

P1V8_NIC 

Linear Regulator from +3.3V or +3.3V standby 

+/-3% 

+1.0V Auxiliary 

P1V0_NIC 

Linear Regulator from +3.3V or +3.3V Standby 

+/-3% 

+1.2V Auxiliary 

Lan_V_1P2 

Linear Regulator from +3.3V Standby 

+/-3% 

+2.5V Auxiliary 

Lan_V_2P5 

Linear Regulator from +3.3V Standby 

+/-3% 

+1.5V 

P1V5_PXH 

Linear Regulator from +3.3V 

+/-3% 

+1.5V or +3.3V  

PCI_VIO 

Switched rail from either 1.5V linear or 3.3V rail 

+/-3% 

VID CPU0 

P_VCCP0 

Switching Regulator from +12V 

N/A 

VID CPU1 

P_VCCP1 

Switching Regulator from +12V 

N/A 

 

Summary of Contents for SE7520BD2




















































































































































































Reviews:

No comments