Intel Server Board SE7501BR2 Installation and Integration Guide
Attaching the Wind Tunnel
1.
Spread the tabs outward slightly (1a). Lower the wind
tunnel assembly onto the retention mechanism (1b).
2.
The tabs on the fan assembly (2a) slide into slots (2b) on
the inner side of the retention mechanism.
3.
The tabs on fan assembly (3a) connect to the outside
surface of the retention mechanism (3b).
4.
Then attach the fan power cable to the corresponding s
board CPU fan connector.
erver
5.
Correct assembly should look like this:
When installing only one processor, there is no need to install the wind tunnel assembly
over the second processor location. Use the wind tunnel assembly over a CPU socket only
when a CPU is installed.
Install the rest of the internal peripherals of your server now, including any floppy, CD, and
hard disk drives. See “Making Required Connections to the Server Board” below for the
server board connection points.
17
