Intel Server Board SE7501BR2
Installation and Integration Guide
Insta
el
C5200 Server Chassis, Hot-Swap Redundant Power
Use these instructions for installing your processor when using the Hot-Swap Redundant
ssis.
he server board. No processor
terminator is required on a single processor system. Do not install a terminator in the
•
age
•
To avoid touching the pins, hold the processor only by the edges when unpacking it.
Ope
Open the lever all the way as shown. This server board has “zero-
ocessor does not drop easily
into the socket holes, make sure the lever is in the full-open
r
1.
Align the alignment triangle mark on the
le
3.
lling the Boxed Intel
Xeon
Processor – Int
S
Version
Choosing the Processor Socket
Power version of the Intel
SC5200 Server Cha
•
If only ONE processor is to be used, it must be installed in the processor socket
labeled CPU1, located closest to the corner of t
SE7501BR2 Server Board.
If installing a SECOND processor, verify that the processors are identical in volt
and speed. Do not mix processors of different types or frequencies.
ning the Socket Lever
insertion force” (ZIF) sockets. If the pr
position and the processor is oriented properly. Applying pressure
will damage the processor pins.
Attaching the Processo
processor with the alignment triang
cutout on the socket.
2.
Insert the processor in the socket.
Close the socket lever all the way as
shown.
14
