Intel Server Board SE7501BR2 Installation and Integration Guide
Installing the Retention Mechanism
1.
Insert the retention brackets.
2.
Tighten the four retention screws.
Applying Thermal Grease
Apply thermal grease to the processor as shown.
Attaching the Heat Sink and Retention C
1.
Place
lips
the heat sink onto the processor as shown.
Heat sink
2.
ab on the inside of the retention clip
*
e
1. Position
Make sure
2. Slide the
own. Note
3. Press do
engage
4. Snap
NOTE
Install both retention clips simultaneously for the easiest installation.
styles may differ.
Verify that the t
engages the slot on the heat sink during installation.
The center slot in the clip provides room for side-to-sid
motion while you engage the retention clip slots on each
side.
clip in the direction sh
both clips as shown.
the tab (2) above engages the slot on the
heat sink base.
the location of the center plastic tab.
to
✏
the other end as shown.
wnward on the retention clip end
the side plastic tab.
13
