Intel SBCEFCSW, Installation Manual

Page: 48 / 62

34
Intel® Server Switch Module SBCEFCSW: Installation Guide
Uninstalling the SAN Utility on a Red Hat* Linux* platform
The Uninstaller Data folder is copied into the installation folder during the initial SAN Utility installation
process. The Uninstaller Data folder contains the Uninstall SAN Utility program that is used to uninstall the
SAN Utility from a network management workstation running Red Hat Linux. In addition, a shortcut to the
uninstallation program is installed in the user’s home directory during the SAN Utility installation process.
The default installation directory is /opt/SANUtility/.
Complete the following steps to uninstall the SAN Utility:
1. At the command prompt, type the following command and press Enter:
# cd /opt/
2. At the command prompt, type the following command and press Enter:
#sh Uninstall_Intel_San_Utility
Using the SAN Utility
Use the following procedures to start the SAN Utility and complete the following tasks:
• Start the SAN Utility and add a new fabric
• Change the password for the default fabric view
• Set user preferences
• Access online help
• Save the default fabric
• Exit the SAN Utility
Starting the SAN Utility and adding a new fabric
When you have successfully installed the SAN Utility and the default fabric view does not exist, the SAN
Utility - Topology window (referred to as the Topology window) opens, as shown in Figure 19 on page 35.