Intel S5000VCL - Server Board Motherboard Technical Product Specification Download

Page: 11 / 74

Product Overview

Intel

Server Board S5000VCL TPS

Revision

2.3

Intel order number: D64569-007

Product Overview

The Intel

Server Board S5000VCL is a monolithic printed circuit boards that support the high-

density 1U server market.

2.1

Feature Set

Feature

Description

Processors

771-pin LGA sockets supporting one or two Dual-Core Intel

Xeon

processors 5100

series and low-voltage Quad-Core

Xeon

processors 5300 series, with system bus

speeds of 1066 MHz or 1333 MHz.
For a complete list of supported processors, see the following link:

http://support.intel.com/support/motherboards/server/S5000VCL

Memory

Six keyed DIMM slots support fully buffered DIMM technology (FBDIMM) memory. 240-
pin DDR2-677 FBDIMMs must be used.

Chipset Intel

5000V Chipset family, which includes the following components:

Intel

5000V Memory Controller Hub

Intel

6321ESB I/O Controller Hub

On-board
Connectors/Headers

External connections:

Stacked PS/2* ports for keyboard and mouse

Two RJ45 NIC connectors for 10/100/1000 Mb connections

Two USB 2.0 ports

Video

connector

Com 1 or Serial A (DB9)

Internal connectors/headers:

One USB port header, capable of providing two USB 2.0 ports

One DH10 Serial B header

Six SATA ports or four SAS ports via the Intel

6321ESB I/O Controller Hub.

These ports support 3Gb/s and integrated SW RAID 0 or 1

One 40-pin (power + I/O) ATA/100 connector for optical drive support

SSI-compliant 24-pin control panel header

SSI-compliant 24-pin main power connector support the ATX-12 V standard on

the first 20 pins

8-pin +12 V processor power connector

Add-in PCI, PCI-X*, PCI
Express* Cards

One PCI super-slot that will support one 1U riser card with one PCI-X* and one PCI
Express* connectors

On-board Video

ATI* ES1000 video controller with 16 MB DDR SDRAM

On-board Hard Drive
Controller

Six 3 Gb/s SATA ports, or four SAS ports

Intel

Embedded Server RAID Technology II with RAID levels

0, 1, 10

LAN

Two 10/100/1000 NICs supporting Intel

I/O Acceleration Technology

System Fans

Two CPU 4-pin fan headers supporting two system blowers and one 3-pin fan header
supporting a system fan

System Management

Support for Intel

System Management Software

Summary of Contents for S5000VCL - Server Board Motherboard











































































Search results

Summary of Contents for S5000VCL - Server Board Motherboard

Reviews:

Related manuals for S5000VCL - Server Board Motherboard

Brands by name

Popular brands

Intel S5000VCL - Server Board Motherboard, Technical Product Specification

Search results

Summary of Contents for S5000VCL - Server Board Motherboard

Reviews:

Related manuals for S5000VCL - Server Board Motherboard

Brands by name

Popular brands