background image

Regulatory and Certification Information 

Intel

®

 Server Board S5000VCL TPS 

  

Revision 

2.3 

Intel order number: D64569-007 

44 

9.

 

Regulatory and Certification Information 

 WARNING 

To ensure regulatory compliance, you must adhere to the assembly instructions in this guide to 
ensure and maintain compliance with existing product certifications and approvals. Use only the 
described, regulated components specified in this guide. Use of other products/components will 
void the UL listing and other regulatory approvals of the product and will most likely result in 
noncompliance with product regulations in the region(s) in which the product is sold. 

To help ensure EMC compliance with your local regional rules and regulations, before computer 
integration, make sure that the chassis, power supply, and other modules have passed EMC 
testing using a server board with a microprocessor from the same family (or higher) and 
operating at the same (or higher) speed as the microprocessor used on this server board. The 
final configuration of your end system product may require additional EMC compliance testing. 
For more information please contact your local Intel Representative.

 

This is an FCC Class A device. Integration of it into a Class B chassis does not result in a Class 
B device.

 

9.1

 

Product Regulatory Compliance 

Intended Application

 – This product was evaluated as Information Technology Equipment 

(ITE), which may be installed in offices, schools, computer rooms, and similar commercial type 
locations. The suitability of this product for other product categories and environments (such as: 
medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment, 
etc.), other than an ITE application, may require further evaluation. This is an FCC Class A 
device. Integration of it into a Class B chassis does not result in a Class B device.

 

9.1.1

 

Product Safety Compliance 

ƒ

  UL60950 – CSA 60950 (USA/Canada) 

ƒ

  EN60950 (Europe)  

ƒ

 IEC60950 

(International) 

ƒ

  CB Certificate & Report, IEC60950 (report to include all country national deviations) 

ƒ

  GOST R 50377-92 – Listed on one System License (Russia)  

ƒ

  Belarus License – Listed on System License (Belarus) 

ƒ

  CE - Low Voltage Directive 73/23/EEE (Europe)  

ƒ

  IRAM Certification (Argentina)  

Summary of Contents for S5000VCL - Server Board Motherboard











































































Reviews: