Intel R2000WF series, Technical Product Specification

Page: 73 / 167

Intel® Server System R2000WF Product Family Technical Product Specification
73
Note : The drive activity LED is driven by signals coming from the drive itself. Drive vendors may choose to
operate the activity LED different from what is described in the table above. Should the activity LED on a
given drive type behave differently than what is described, customers should reference the drive vendor
specifications for the specific drive model to determine the expected drive activity LED operation.
6.3 Peripheral Power Sources
Power for all backplanes and peripheral storage devices is drawn from two power connectors labeled as
“HSBP_PWR” and “Peripheral PWR” on the server board as illustrated below.
Figure 47. Server board peripheral power connectors
 HSBP power – The hot swap backplane power connector provides power for all front mounted
backplane options. Appropriate power cables to support any given backplane option are included
with the given system model or given backplane accessory kit. For the HSBP power connector pin-
out, see Table 35.
 Peripheral power – The peripheral power connector is used to provide power to various add-in
options including: internal mounted SSD drives, and the 2 x 2.5” rear mount hot swap backplane
accessory kit. Appropriate power cables for supported peripheral options are included with the given
system model or given accessory kit option.
6.4 Hot Swap Backplane Support
The 2U system has support for several backplane options.
For 2.5” drives, available backplane options include:
 8 x 2.5” drive combo backplane with support for SAS/SATA/NVMe*
 8 x 2.5” drive dual port SAS backplane
 2 x 2.5” drive rear mount SATA SSD backplane
For 3.5” drives, available options include:
 8 x 3.5” drive backplane with support for SAS/SATA
 12 x 3.5” drive backplane with support SAS/SATA and up to two NVMe drives
Peripheral power
(Peripheral PWR)
HSBP power
(HSBP_PWR)