Intel® Server System R2000WF Product Family Technical Product Specification
103
Figure 73. Triple RMFBU (default) mounting bracket installation
Available as an accessory kit option (iPC – AWTAUXBBUBKT) is a mounting plate supporting up to two
RMFBU modules (AXXRMFBU2 or later). This option is attached to the air duct in two possible mounting
locations as shown below.
Figure 74. Dual RMFBU mounting bracket installation
Note
: The two RMFBU node mounting plates cannot be installed if a full length PCIe add-in card is installed
in the adjacent riser card or if the Intel® Xeon Phi™ shipping bracket is installed in the system.
7.6
Intel® RAID Expander Card Support
System configurations consisting of more than eight SAS drives may require the addition of an SAS expander
card. In the 2U 16x2.5” or 24x2.5” system configurations, an SAS expander can be mounted in the area
directly behind the drive bays.
Note
: The onboard SATA controllers are not compatible with and cannot be used with RAID expander cards.
Dual RMFBU module
mounting plates
Summary of Contents for R2000WF series
Page 2: ...Blank page...
