Intel Pentium M 715, Datasheet

Page: 27 / 84

Datasheet 27
Electrical Specifications
NOTES:
1. The typical values shown are the VID encoded voltages. Static and ripple tolerances (for minimum and
maximum voltages) are defined in the load line tables, Table 3-8 through Table 3-21 . Adherence to loadline
specifications for the Pentium M processor is required to ensure reliable processor operation.
2. These are VID values. Individual processor VID values may be calibrated during manufacturing such that two
devices at the same speed may have different VID settings. Actual voltage supplied to the processor should
be as specified in the load lines in
Figure 3-11 and Figure 3-12 . Adherence to load line specifications is
required to ensure reliable processor operation.
3. The voltage specifications are assumed to be measured at a via on the motherboard’s opposite side of the
processor’s socket (or BGA) ball with a 100-MHz bandwidth oscilloscope, 1.5-pF maximum probe
capacitance, and 1-M
Ω
minimum impedance. The maximum length of ground wire on the probe should be
less than 5 mm. Ensure external noise from the system is not coupled in the scope probe.
4. For 733J, CPU signature = 06D8h.
V
CCD733
Pentium M Processor,
Ultra Low Voltage,
733 Core VCC for
Enhanced Intel
SpeedStep
Technology Operating
Points:
V 1, 3
1.1 GHz 0.940
1.0 GHz 0.924
900 MHz 0.892
800 MHz 0.876
600 MHz 0.812
V
CCD723
Pentium M Processor,
Ultra Low Voltage,
723 Core VCC for
Enhanced Intel
SpeedStep
Technology Operating
Points:
V 1, 3
1.0 GHz 0.940
900 MHz 0.908
800 MHz 0.876
600 MHz 0.812
Table 3-6. Voltage and Current Specifications - Ultra Low Voltage Processors (Sheet 2 of 2)
Symbol Parameter Min Typ Max
VID#
GTyp
VID#
HTyp
VID#I
Typ
VID#
J Typ
VID#
K Typ
VID#
L Typ
Unit Note