Intel® Server Board M10JNP2SB User Guide
42
9.5
Heat Sink Removal
The instructions in this section describe the process of removing a processor heat sink. The process
described is for reference purposes only. The installed heat sink on the server board may be different.
Required Tools and Supplies
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Phillips* head screwdriver
Figure 27. Removing the fan cable
1.
Remove the fan cable from the 4-
pin processor fan connector labeled “CPU_Fan” on the server board
.
Figure 28. Removing the heat sink
1.
Using a Phillips head screwdriver, loosen the screws on the head of the 4 push pins (see letter A).
2.
Carefully lift the push pins to detach the heat sink from the server board (see letter B).
3.
Lift the heat sink from the server board (see letter C).
Summary of Contents for M10JNP2SB
Page 2: ... Blank page ...
Page 15: ...Intel Server Board M10JNP2SB User Guide 15 Figure 4 Component height restrictions ...
Page 16: ...Intel Server Board M10JNP2SB User Guide 16 Figure 5 Major components and connectors 1 of 2 ...
Page 17: ...Intel Server Board M10JNP2SB User Guide 17 Figure 6 Major components and connectors 2 of 2 ...