manualshive.com logo in svg

Intel L440GX+, Product Manual

Share
Download
Intel L440GX+ Product Manual Download Page 69

Server Board Product Guide 

69

Connect

When [Re]Connect is selected from the Connect menu, the Connect dialog in Figure 11 is
displayed.  This dialog allows you to connect to a server.  If the client machine is already connected
to a server, initiating connection generates a warning message.  The message indicates that the
existing connection will be terminated if you continue trying to initiate the new connection.  You
are prompted to enter the EMP password whenever a connection is attempted.

Figure 11.  Connect Dialog

Options available in the dialog are:

•

 

Line Selection

 - you can specify whether to use a direct connection or dial-up modem

connection to the server.

 

Dial-up 

- connects to a selected server with a modem.

 

Direct connect (Serial Line) 

- connects to the selected server directly using a null modem

serial cable.

•

 

Server 

-  a server name can be selected from the dropdown list of available servers.  A server

must be selected when the line selection is Dial-up.

•

 

Serial Line 

- These options are enabled when the line selection is set to Direct connect

(Serial Line).

 

Baud Rate 

- must be 19200 for EMP to connect properly.

 

COM Port No.

 - set the COM Port number to the port which the null modem serial cable is

connected to.

•

 

Connect

 - initiates the connection to the connected server.  When this button is clicked, you are

prompted for the EMP password.

•

 

Config 

- displays the Phonebook dialog.

•

 

Cancel

 - exits the Connect dialog without taking any action.

•

 

Help 

- displays the help information for this dialog.

Summary of Contents for L440GX+

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands