manualshive.com logo in svg

Intel L440GX+, Product Manual

Share
Download
Intel L440GX+ Product Manual Download Page 45

Server Board Product Guide 

45

System Management Submenu 

(continued)

Feature

Choices

Description

EMP Hangup Line
String

ATH

Sets the Hangup Line Sequence for the modem being
used for EMP.  Used in EMP modem mode.

Modem Init String

AT&F0S0=1S14=0&D

Sets the initialization string for the modem being used for
EMP.  Used in EMP modem mode.

This field is only 16 characters long.  The High Modem
Init String field is a continuation of the Modem Init string
so you can enter in another 4 characters.

High Modem Init
String

0

This is a continuation of the Modem Init String.  When 16
characters are typed into the Modem Init String field, this
field will appear to allow another 4 characters to be
typed in.

EMP Access Mode

Pre-boot Only

Always Active

Disabled

Pre-boot Only - EMP is only enabled during power down
through end of POST.  COM2 is returned to system use
at the end of Post when operating system boots.
Always Active - EMP is always enabled.  COM2 cannot
be used by operating system.  It is now dedicated for
EMP use.
Disabled – EMP is disabled.  COM2 is always available
for system use by console redirection or operating
system.

EMP Restricted
Mode Access

Disabled

Enabled

If set to Enabled, Power on/off and Reset server controls
via EMP are no longer available.

EMP Direct
Connect/Modem
Mode

Direct Connect

Modem Mode

Sets how EMP connects to the server.  Direct Connect
means a null modem serial cable directly connects
COM2 connector port to the EMP console machine.

Modem mode indicates that a modem is connected on
COM2 for EMP use.

Server Management Information Submenu

Items on this menu are set when the server board is manufactured and cannot normally be changed.
The last two items refer to the firmware level of the BMC on the server board and HSC (Hot Swap
Controller) from the Astor II server chassis.  If circumstances require a change in the
server board’s firmware, specific direction will be provided by Intel Customer Support.

Feature

Choices

Description

Board Part Number

N/A

Information field only

Board Serial Number

N/A

Information field only

System Part Number

N/A

Information field only

System Serial Number

N/A

Information field only

Chassis Part Number

N/A

Information field only

Chassis Serial Number

N/A

Information field only

BMC Revision

N/A

Information field only

Primary HSB Revision

N/A

Information field only

Summary of Contents for L440GX+

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands