2.12
Installing and Removing the Intel® Remote Management
Module 4 Lite
2.12.1
Installing the Intel® RMM4 Lite
1.
Power off the compute module and disconnect the power cable(s).
2.
3.
Remove the Intel® RMM4 Lite from its package.
4.
Locate the RMM4 Lite connector on the server board next to the Riser Slot 2.
5.
Place the Intel® RMM4 Lite over the connector and match the orientation of the Intel® RMM4 Lite to
that of the connector (See letter
A
).
6.
Press the Intel® RMM4 Lite down onto the connector.
Figure 74. Installing the Intel® RMM4 Lite
2.12.2
Removing the Intel® RMM4 Lite
1.
Power off the compute module and disconnect the power cable(s).
2.
3.
Carefully grasp the Intel® RMM4 Lite and pull it up until it disengages from the connector.